All of the latest robot vacuum cleaners from Xiaomi comes with an excellent smartphone app that allows you to fully control your robovac. These include Roborock models such as S4, S5 Max, S6 Pure, and S6 MaxV.
Nevertheless, if you have the older versions, you’ll still have a good experience using the Mi Home App. But if you have the 2019 or 2020 unit, like the Roborock S6, you can expect so much more, including improved mapping features. You can read more about this model and review of other best robot vacuums at https://cleanup.expert/robot-vacuums/.
So what does this powerful smartphone app can bring to the table this time around? And how can you use it effectively? This article will answer all of these questions and more, so make sure to keep on reading.
Roborock Installation And Setup
If you have a new robot, make sure to charge it first as per the recommendation of the manufacturer before letting it clean your floors. You also need to mount its floor plate on the charging dock. Doing so will protect your surfaces from water damage if in case your Roborock robot vacuum needs to charge while its water reservoir is mounted.
Connecting it to the Mi Home App is pretty easy. You can actually do it in as little as five minutes or less. You can use the app for the following functions:
- Start, stop or pause the robovac
- Set up a convenient cleaning schedule
- Choose your preferred cleaning mode
- Let it return to its charging station
- See a live map of your home
- Activate and deactivate notifications, and a whole lot more
Steps On How To Connect Your Roborock With Your Smartphone
Xiaomi’s Roborock line of robot vacuums is powerful. They can suck all sorts of dirt and debris that crosses their path, from dust to crumbs. Likewise, you can control it remotely via its Mi Home App.
With that in mind, here are the steps on how you can connect your Roborock to your smart device:
Step 1: The first thing you need to do is to download the Mi Home App first from the App Store or Google Play Store. Once done, open the app.
Step 2: Lift your unit’s lid, where you’ll find two buttons. Press these simultaneously until you see the Wi-Fi indicator starts flashing.
Step 3: On your Mi Hope app, tap on the Scan button.
Step 4: Under its menu, look for Vacuum Cleaner, then add it to your list of devices.
Step 5: Enter your Wi-Fi SSID and password.
You’re done! It’s that easy. Your robot vacuum cleaner is all set to get to work. Also, now you can utilize the Mi Hope App to customize the settings of your Roborock for your cleaning needs.
If you own more than one Roborock vacuum cleaner and app supports them, you’ll find all of them under the list of robots connected to it. Once you select the robot that will do the cleaning, the app will show a map of your home if you’ve already used that particular device before.
If not, the first time your robot with a laser-based navigation system runs your home, it creates the map, which it’ll automatically save in the app. The main screen of the Mi Home App allows you to do almost everything, such as room cleaning, zone cleaning, and cleaning of the entire house.
The Clean option sets your robot up to clean all over your home. If you want your Roborock to return to its dock or end its current cleaning session, simply tap the button on the bottom left part of the app. Meanwhile, the Zone option is for cleaning individual rooms.
Setting Up Map Saving And Selective Room Cleaning Options
Step 1: Open the Mi Home App on your smart gadget and tap on your vacuum cleaner.
Step 2: Access the Settings menu by tapping the three dots located in the top right corner of the app interface. Tap on Vacuum Settings and then turn on Map Saving.
Step 3: Open the saved map and check how rooms have been marked. If you want to change it, simply tap the Edit Map item to either divide or combine any rooms in your home.
Step 4: You can use Room Mode to clean a specific room. Just tap the room or rooms you want your robotic vacuum to take care.
Step 5: Tap Clean and your Roborock will start cleaning up your surfaces.
As smart as these robotic vacuums are, you will still encounter Wi-Fi connection issues from time to time. If this happens, here’s a guide on how to solve the connectivity problem of your Roborock S4, S5, or S6:
Step 1: Open your Mi Home App and access its settings. Change your local region if China mainland is still selected
Step 2: Go to your smartphone’s settings and enable the location permission for the app.
Step 3: Consider changing your Wi-Fi password without any special characters, and try connecting.
Step 4: If you receive a message that says you cannot connect to the public Wi-Fi, your Wi-Fi encryption mode is probably set to WEP. If so, log in to the settings page of your router to change it to WPA or WPA2.
Step 5: If all else fails, you may want to reset the robot’s Wi-Fi connection itself. Simply hold the recharge and spot cleaning buttons simultaneously for about five seconds or until you hear a voice prompt.
Make sure to download the official Roborock step-by-step guide on how to connect it to your smartphone. Also, check the Wi-Fi indicator of your device. You’ll know that it is connected to Wi-Fi when the light is solid. On the other hand, it’ll flash with a higher than normal frequency when it’s trying to connect.
Moreover, the app may sometimes show an error after troubleshooting your Roborock even if it’s successfully connected and the Wi-Fi light indicator is solid. In this case, close the Mi Home App, reopen it, and check if your unit is on its list of vacuum cleaners.