It may appear fairly easy to add a swimming pool or spa to a facility. However, maintaining it and assuring that the water is healthy becomes a tough ask. Many individuals look up to swimming pool & spa test strips supplier in order to check the water for its quality. It is critical if you plan to maintain a good pool or spa.
Today, we have the strips available for testing the quality of the water. These are manufactured using the latest technology to assure less errors and easy testing of water. Compared to the traditional liquid tests, the strips tend to be way better for testing the water. Here, we will take a look at the pool test strips, how to use it, and why you must use it.
Swimming pool testing strips
The swimming pool test strips are perhaps the most popular option for testing the pool water nowadays. It has made the hectic job of testing pool water fairly simple. All you have to do is get yourself these simple strips and test your pool water against it. One of the biggest reasons for the popularity of these strips is that they are pretty inexpensive. However, that does not mean one should go for the cheapest options available in the market. You must contact a reputable swimming pool and spa test strips supplier if you are looking to attain appropriate results.
How to test pool water using strips?
In order to test the pool water with these strips, immerse the strip into you pool water for a brief moment (a second or two would be enough). Take it out from the water and remove the strip, assuring that the pads are facing upwards. Don’t shake it off too much.
Now, hold the strip these for about 15 seconds until the strip thoroughly checks the water. Once done, compare the color on the strip with the chart given to know the levels of various chemicals in your pool.
Why to use test strips?
It is important to maintain a health pool and spa water and it can only be done if the chemicals in it are right in proportion. Therefore, it is crucial for a person to test the water of his or her pool.
Usually, people compare the strips with the traditional drop testing method. Well, the strips are way more convenient to use and pretty less expensive. All you have to do is to immerse the strip in the water, take it out, match the color with the legend, and there you have it. With the drop testing, you need to take out the water from the pool, put it in a beaker, dissolve the number of drops in it as instructed, and then you’ll get the color of water to change before you can match it with the chart.
Moreover, there are a number of different strips available in the market. Most of the time people use multi-purpose strip to check the water levels of chlorine, bromine, pH, alkalinity, hardness, and cyanuric acid.