Early this month, we came across a report which revealed the specification details of the upcoming OnePlus 7 and OnePlus 7 Pro, that was in line with the previous leaks as well as rumours. Well, today we got the complete and detailed specification details of the much anticipated OnePlus 7 Pro. Let’s dig into the article to check out the specs sheet of the device.
Full Specifications Of OnePlus 7 Pro
According to the source, the smartphone will sport a 6.67-inch Fluid AMOLED display with 3120 x 1440 pixels resolution and 516ppi pixel density, as well as 90Hz maximum refresh rate. Under the hood, the smartphone is powered by octa-core Qualcomm Snapdragon 855 processor (1 x Cortex-A76 core @ 2.84GHz, 3 x Cortex-A76 cores @ 2.42GHz, and 4 x Cortex-A55 cores @ 1.8GHz), along with Adreno 640 GPU to boost the graphics.
The device comes in three RAM + storage variants – 6GB RAM + 128GB UFS 3.0 Nand Flash memory, 8GB RAM + 256GB UFS 3.0 Nand Flash Memory, and 12GB RAM + 256GB UFS 3.0 Nand Flash Memory. And just like its predecessor, it doesn’t have a microSD card slot.
Coming to the camera, the source claims that the OnePlus 7 Pro will sport a triple rear camera setup, and that’s in the combination of a 48-megapixel Sony IMX586 sensor with f/1.6 aperture, and OIS. There’s a secondary 16-megapixel wide-angle sensor with f/2.2 aperture and 117-degree field of view, and an 8-megapixel sensor with f/2.4 aperture, 78mm focal length, and 3x optical zoom. The cameras also support dual-LED flash, phase detection autofocus (PDAF), laser autofocus (LAF), and continuous autofocus (CAF). That’s not all, it also supports 4K video recording at 30fps/60fps, 1080p videos at 30fps/60fps, 720p videos at 30fps, and super slow motion 1080p and 720p videos at 240fps and 480fps respectively.
Speaking about the front camera, the smartphone will feature a pop-up camera and that consisting a 16-megapixel Sony IMX471 pop-up camera with f/2.0 aperture, EIS, and 1080p video recording support at 30fps. The smartphone also supports the in-display fingerprint scanner and we can safely assume to have the face unlock feature too.
In terms of sensors, the device will have accelerometer, gyroscope, proximity sensor, gesture sensor, brightness sensor, and compass. The OnePlus 7 Pro is also said to come with stereo speakers support as well. Talking about the software, the device will run on Android Pie with the OxygenOS atop, and the device will get Android Q beta OxygenOS in the future. It will ship on 4,000mAh battery with support for Warp Charge 30 (5V/6A).
Furthermore, the OnePlus 7 Pro is said to come in three colour options – Nebula Blue, Mirror Grey, and Almond. The source also reveals the dimensions measure at 162.6×75.9×8.8mm, and it weighs 210 grams. You guys can able to read all the available information of the upcoming OnePlus 7 series by heading over the link.